Bronze
Navy Seabees Seal or Flag Holder
To see a larger image please click on the images above.
This
beautifully crafted bronze Navy Seabee Seal/Flag Holder was designed by the Navy Seabee
Veterans of America, Island X-1, Kearney, NE and the mold to
produce this amazing 3D rendering of the Seabee Mascot was created by the
expert craftsman at Centec Cast Metal Products of Fremont, Ohio. These markers are
solid bronze, weigh approximately 2 ˝ pounds, are 6” in diameter and ˝” thick
(the flag holder version has three 1” protrusion on the back side to receive a
standard 3/8” wooden dowel stick with U.S.A. flag and the bottom protrusion is
tapped to receive a 5/16” metal rod).
Options
1. Use
the “Seal” option below to
order just a bronze seal with a flat
back (these seals can be affixed directly to a headstone or monument to
honor a Seabee or could be affixed to something like a walnut plaque to express
how proud you are to be a Seabee! The “Seal” option below is $39.00 ea. + $11.50 S&H (for each
additional seal/marker ordered PayPal “Shopping Cart” will automatically add
just $2.50 S&H, if you ship them
all to the same address).
2. Use
the “Flag Holder” (NO metal rod) option below to order just the“flag
holder” version (with the protrusions on the back to receive a 3/8” wooden
dowel stick with a U.S.A. flag). If you order just the “flag holder” (NO metal rod) you will need to
go to a local hardware store (like Home Depot) to purchase a 5/16” metal rod,
threaded on one end. The ”Flag Holder” option below is $40.00 ea. + $11.50 S&H (for each additional seal/marker
ordered PayPal “Shopping Cart” will automatically add just $2.50 S&H, if you ship them all to the same address).
3. Use
the “Flag Holder w/Steel Rod” option below to order both the “flag
holder” version (with the protrusions on the back to receive a 3/8” wooden
dowel stick with a U.S.A. flag) and a steel rod. The steel rod is 5/16”
diameter (threaded on one end, pointed on the other) that can be either
inserted into a concrete slab (using a hammer drill and a 5/16” drill bit) or
the pointed end of rod can be used to insert it directly into the ground close
to a veteran’s headstone or monument. The “Flag
Holder w/Steel
Rod” option is $41.60 ea. + $11.50 S&H (for each additional
seal/marker ordered PayPal “Shopping Cart” will automatically add just $2.50 S&H, if you ship them all to
the same address).
4. Use
the “Flag Holder w/Brass
Rod” option below is to order both the “flag holder” version (with the
protrusions on the back to receive a 3/8” wooden dowel stick with a U.S.A.
flag) and a brass rod. The brass rod is 5/16”
diameter (threaded on one end, pointed on the other) that can be either
inserted into a concrete slab (using a hammer drill and a 5/16” drill bit) or
the pointed end of rod can be used to insert it directly into the ground close
to a veteran’s headstone or monument. Although the brass
rods are $2.40 more than steel (our cost is $3.95 on the brass rods) they
are beautiful and they never
rust! The “Flag Holder w/Brass Rod” option
is $44.00 ea. + $11.50 S&H (for each
additional seal/marker ordered PayPal “Shopping Cart” will automatically add
just $2.50 S&H, if you ship them
all to the same address).
5. For
“Custom Orders”, if
you wish to order multiple Seals/Flag Holders (6 or more) to be shipped to the same address, we will
offer you slightly reduced pricing along with the combined shipping to
try and lower your costs. If you wish to
order multiple seals/flag holders, please email us at nebraskaseabees @ gmail.com and specify the number and type of seals/flag
holders and the number of steel or brass rods you
would like to order. Please also provide us your shipping address so we
can calculate the combined shipping costs to your location. We will then email
you a “PayPal Invoice” with the details and pricing of your custom
Seabee Seal/Flag Holder order.